Shingle roofing is the backbone of residential roofing in Burnt Hills. Whether you're choosing architectural shingles for their dimensional look or three-tab shingles for budget-friendly coverage, the installation process is what determines how long they last. Burnt Hills Roofing & Maintenance follows manufacturer nailing specs and overlap requirements on every job.
Every shingle roof starts with the layers beneath the shingles. Synthetic underlayment rolls across the entire roof deck as the primary waterproof barrier. Ice-and-water shield goes down in the valleys, along the eaves, and around every penetration — chimney flashing, pipe boots, vent boots. Drip edge along every eave and rake directs water into the gutters instead of behind the fascia.
Our Shingle Roofing Process
Shingle Selection
We inspect your existing roof deck and sheathing, measure the area, and help you choose between architectural and three-tab asphalt shingles. Color samples brought to your Burnt Hills home.
Strip & Inspect
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Waterproofing Layer
Synthetic underlayment across the full roof deck. Ice-and-water shield in valleys, along eaves, and around chimney flashing, pipe boots, and vent boots. New drip edge installed at every eave and rake. Step flashing and counter-flashing at all wall transitions.
Nailing & Overlap
Field shingles installed with proper exposure and overlap. Nailed per manufacturer specs — 4 nails standard, 6 in high-wind zones. Starter strips at the eave prevent wind uplift. Ridge cap shingles finish every peak with integrated ridge vent for ventilation.
What Burnt Hills Customers Say
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"We called expecting to wait days, but they were here the same afternoon. Fair pricing, quality work, and they kept us informed every step of the way."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
Why Choose Burnt Hills Roofing & Maintenance for Shingle Roofing?
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
30+ Color Options
Architectural shingles in weathered wood, charcoal, onyx black, estate gray, desert tan, and 25+ more. We bring samples to your Burnt Hills home so you can match your siding and trim.
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.